JoeCo BlackBox BBR1-B

JoeCo BlackBox BBR1-B

Профессиональный студийный цифровой 24-х канальный рекордер, 24 бит/ 96 кГц, балансные входа/выхода, 6 х D-SUB разъемы, память - внешний жесткий диск (в комплект поставки не входит). ЕСТЬ В НАЛИЧИИ!


Стоимость: 147965 руб.

The BLACKBOX RECORDER with Balanced i/o enables audio capture via a mixing console with balanced insert points or direct outputs. The three lower 25-way female D-type connectors are used as balanced inputs and the three upper 25-way female as balanced outputs. The unit can use the same high quality D-type cables as for the unbalanced BBR1, but these are not supplied as there are too many different types of termination (1/4″ TRS, XLR male, XLR female, 25-way D-type, etc.).

In the same manner as the Unbalanced model, the BBR1B loops the inputs directly to the outputs via relays when in record or stop so that even a power failure on the BBR cannot affect the audio through the PA. Other BlackBox Recorder features remain unchanged.

The Balanced i/o interface uses high quality balancing receivers and transmitters and has been designed specifically for the BLACKBOX RECORDER to be fully transparent.

General Specifications

Sample Rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz
Bit depths: 16bit; 24bit
Disk interface: USB2
Format: FAT32
File type: Broadcast WAV (BWAV)
Media: USB2 hard disk (7200rpm recommended),
USB2 flash drive — 200x minimum (except for
MADI and DANTE systems which have more
demanding data rates), SHDC (Class 10 with
suitable adapter except MADI and DANTE)
Monitoring: 1 x 1/4” TRS jack socket,
headphone mix/solo
Physical: 19” rack mounted 1U
Dimensions: (425mm x 150mm x 44mm)
Weight: < 2.4kg

Control and Synchronisation

MIDI: 1 x 5-pin DIN (open loop) – MIDI time
code (MTC) and MIDI machine control (MMC)
protocol
LTC: 1 x 1/4” TRS jack socket:
Frame rates supported: 30fps, 29.97drop fps,
29.97non-drop fps, 25fps, 24fps, 23.98fps
Machine control: 1 x 9-pin D, SONY PII protocol
Audio clock synchronisation: 2 x RCA sockets
AES3 / SPDIF Format, also used for
communications to slave units
Footswitch: momentary switch on ring of LTC
TRS socket
Keyboard: 1 x mini DIN PS2 connector,
Standard 102 key
Power: 9v – 16V dc (< 25W). 2.1mm dc inlet.
PSU supplied

Analogue Inputs:

Levels: -10dBu / +4dBu switchable
Max input level: +22dBu = 0dBFS
A-D conversion: 24bit, 96kHz
106dB S/N, 96dB THD+N (typical A-weighted)

Analogue Outputs:

Levels: -10dBu / +4dBu switchable
Max output level: +22dBu = 0dBFS
D-A conversion: 24bit, 96kHz
106dB S/N, 94dB THD+N (typical A-weighted)

Яндекс.Метрика